Відео

Fausse pub ... ! 😂

You are not sharpening on a honing steel, only honing!

Link to buy this item please?

Didnt show other side of knife. The belt goes up and damage knife.

Can the knife jig hold a dagger?

This is massive upgrade to elite grinding solution, speed control better, much easier to align belt on blade grinder, and angle adjustment for blade grinder attachment no longer gets in way of large handle knives,

I really like my "KO2," the Elite Mark 2. Kudos to Work Sharp for all the meaningful upgrades!

The grey haired dude has such a wimpy scared sounding voice that I can barely even hear what he says.

I used it yesterday for a couple of knives, quite nice. Always had issues with the other angle setter.

I got my knife to 1200 and im out of stone. So what are the other stone do i need in between to get to 3000. Or even 8000

natural stone but very expensive

F.DICK makes the best honing rods

What about putting black marker on the edge to see that I've sharpened it fully?

Tips: get a 6” stone adapter from Hapstone, with you can use any 1x6 stone From cheap china to best on market. Going with this a knife clamp from KakBritva, both specially made for this sharpening system.

Those stones sounded really dry

A steel only hones the knife back to a keen edge

It will be concave ... not straight

And don't forget to clean the knife before you cut anything otherwise you're eating metal shavings 😂

Yeh , and again another 45 $ for a piece of plastic junk just because of the name Tormek 🤮🤮👎👎👎

As a millwright I use a strip of sandpaper laid on the table or a file to sharpen my knifes. If they get real bad a bench grinder or an angle grinder clamped in a vise.

IM-313

I have a question about which stones I have? I have a Norton Multi-Oil Stone for reference. Which stones is the device using for my knowledge please? Thank you.

I’m having to clean my late father in law’s today. It’s looking good now. Very expensive. IM-313 is what I am cleaning up and getting ready for use. Thank you for your videos!

Trailing makes zero sense except for stropping

instructions unclear, i rested my tip on the table and moved the knife into my junk

Thanks. I enjoy my Tormek machine so was glad to hear you mention it.

Aren't honing rods for straighting / aligning the edge not sharpening it?

Dude, you should not be giving advice on this topic, you clearly don't know what you are doing

Honing rods DO NOT SHARPEN knives; they realign an existing bur. If a knife has been properly sharpened and stropped and HAS NO burr, those rods will do absolutely nothing. It's a placebo effect.

Apparently a guy made a vid on the steals, and they dont do anything Just saying, you should look into that maybe

Thanks and I ordered one.

This along with the extra fine diamond wheel should take it to the next level...

This sharpener is great if you don’t care about the life of your knife just so you know

6

Thats is not sharpening. That is straighting the feather. Otherwise known as honing

Very helpful info, I've wanted to use the sharpening rods better. One point: your video colour is off, it's heavy on the yellow tones. Looks to be lacking reds. I'm thinking something happened during editing, unintentionally.

Slow is smooth, smooth, is fast. That is a true statement on so many things in life.

The fist 7 sevon seconslds hurt , me the stone and knife

a honing rod does not sharpen. it just straightens out the metal teeth or burs that get bent over.🍻

"Abrasive" rods for starters do not have any abrasiveness to them at all and they do NOT sharpens knives, they are used to remove burs and incorrectly used to straighten rolled apexes.

I already use the DT Diamond flat file; I have the one with the red hinge area, I don't know what the difference is with the one with the blue hinge, should I be using both?

When using do you change wheels for different grits etc ?

I'm going to find out if it will work on the TSPROF ko3

Well done video guys, just 3d printed a sharpening angle finder. but that paper one is a great trick.

i have something to confess... i never wash my sharpen rods before. is it bad?

How do you think a splash n go stone will work as a hand held stone? I just don’t see it staying lubricated for long enough to be worth having over oil and diamond/ceramic. Thoughts?

What stine progression do you use? Shapton glass 8k?

You nailed it sport

Very helpful. Just recently acquired an old Holub electricians knife that I cleaned up and needed some tips on sharpening that curved blade.👍🏻

to mention and show the steel in a video titled "sharpen lika a pro" is not very trustworthy, this method has been debunked, it does not *sharpen*